Both Plate Systems, Two EMG Units
Kinvent Ultimate Solution Pack
Three things arrive at the top of this ladder that no rung below it holds together. Both plate systems in one order, the K-Force Plates for balance, posture and force distribution and the K-Deltas for dynamic force, side-to-side symmetry and jump analysis. Two K-Myo surface electromyographs, supplied as a duo pack. Frames for the K-Force Plates, and a duffle bag to move the kit in.
A second EMG unit is the quiet upgrade here: two channels let a session compare one side against the other, or one muscle against its partner, in the same recording. This pack suits a department running more than one station at a time. Twelve months of Kinvent Physio ship with it on the EXCELLENCE tier. That subscription has been included since the Advanced Pack three rungs down, so everything this pack adds above those rungs is equipment.
Sensor types8Every type on this ladderPlate systems2K-Force Plates and K-DeltasK-Myo units2Supplied as a duo packLicenceEXCELLENCEOne year, top of the tableTwo plate systemsTwo EMG sensorsPlate framesDuffle bag
Licensing A Kit This Size
Four figures to plan around
Nine units across two plate systems changes how the software table reads. The EXCELLENCE subscription included here sits at the top of every row, and these four published figures shape how a department this size runs the app.
?Five sensors in Smart ModeSmart Mode covers five sensors at once, and the included tier carries it. This pack holds more units than that figure, so a protocol using everything at once needs planning around it.5 sensors?Twenty devices at the topThe terminal count runs three, six, twenty across the three tiers, and this pack lands on the last of them. A kit spread over several rooms is exactly the case that number exists for.20 terminals?Testing a whole squadGroup training is a middle-tier row and group testing is a top-tier row. Screening a squad in one session rests on the second of those, and the included tier carries it.Top tier only?What can leave the appGroup export of reports starts at the middle tier. CSV export of raw data and Video K-apture are both top-tier rows, and both come with this pack, so analysis can continue well outside the app.CSV and video: top tier
What Only This Rung Holds
The full set, and the frames
Everything below chooses between the plate systems. This pack carries both, adds a second EMG channel, and puts frames under the K-Force Plates.
⚖️Balance plates includedK-Force Plates?Large plates includedK-Deltas?Frames under the platesStability⚡⚡Two activation channelsK-Myo duo?Side against side in one takeTwo sensors?️More than one station runningDepartment scale?Duffle bag itemisedTransport?️Top tier for twelve monthsEXCELLENCE
Sensor Detail
Two plate systems and the handhelds
Dynamic
K-Deltas, the moving half
The large plates handle what happens at speed: dynamic force, side-to-side symmetry, jump analysis. Owning them alongside the smaller plates means a movement test and a standing test can run on the equipment each was categorised for.
- Dynamic force through a movement
- Symmetry between left and right
- Jump analysis on a large surface
Dynamic forceJump analysisWith frames
K-Force Plates, the standing half
The K-Force Plates cover balance, posture and force distribution, and this pack supplies them with frames. The frames hold the plates in a fixed relationship to each other, so a stance set up on Monday can be reproduced on Friday.
- Balance and postural measurement
- Force distribution across both plates
- Supplied with frames in this pack
BalanceFramesHandheld set
K-Push and the rest of the handhelds
Underneath the plates sits the same handheld set every rung carries. The K-Push takes isometric strength, the K-Pull takes tensile force, the K-Grip takes grip, the K-Bubble takes pressure and activation, the K-Move takes joint angle. Five instruments, one profile, one app.
- K-Push and K-Pull for push and pull force
- K-Grip with accessory, and K-Bubble
- K-Move for joint range of motion
Five handheldsK-Force app
The Pack Ladder
The top of the ladder
Every pack here is a sensor set with twelve months of Kinvent Physio attached. This one is the only rung that itemises both plate systems and a second surface electromyograph.
DiscoveryThree sensors: K-Push, K-Pull, K-Move.3 sensorsEntry tier1-year licenceShop the Discovery PackStarterAdds K-Grip and K-Bubble.5 sensorsStarter licence1-year licenceShop the Starter PackEvolutionAdds K-Force Plates and a duffle bag.6 sensorsForce plates1-year licenceShop the Evolution PackAdvancedAdds K-Myo with accessories.7 sensorsExcellence licenceSurface EMGShop the Advanced PackExpertAdds K-Deltas.7 sensorsK-Deltas1-year licenceShop the Expert PackYou’re HereUltimate SolutionEvery sensor, plus plate frames.Full rangePlate frames1-year licenceCurrently viewing
Questions
Frequently Asked Questions
Nine units and a bag. Both plate systems, meaning a set of K-Force Plates and a set of K-Deltas. Two K-Myo surface electromyographs as a duo pack. Then the handheld five: K-Grip with accessory, K-Bubble, K-Push, K-Pull and K-Move. A duffle bag is itemised with them, and Kinvent’sadds frames for the K-Force Plates.Two channels of surface EMG can record at the same time, so one session can hold the activation of two sites at once. Every rung below this one itemises a single unit.Yes. The contents itemise the K-Force Plates for balance, posture and force distribution together with the K-Deltas for dynamic force, symmetry and jump analysis. It is the only pack on this ladder that lists both.Kinvent describe the K-Force Plates in this pack as supplied with frames for stability. They hold the two plates in a set position, which is what makes a stance repeatable between sessions.EXCELLENCE, for twelve months, as the listing states. Worth knowing before you compare rungs: the Advanced Pack and the Expert Pack carry that same tier, so the software has been at its ceiling for three steps and everything this pack adds is equipment.Kinvent’s published figure is five sensors, listed on the middle and top tiers. This pack contains more units than that, so a whole-kit protocol should be planned with the five-sensor figure in mind.That depends on terminals, which are the devices signed in to the licence. This pack’s tier allows twenty of them, where the middle tier allows six and the entry tier three, so a department spread over several rooms has room to work.No. The itemised contents cover the sensors on this pack ladder. The K-Power motion sensor and the 3D Deltas multi-axis plates are sold as their own products and are not part of this list.Four things are itemised here that are not itemised there: the K-Force Plates, their frames, a second K-Myo and a duffle bag. The handheld sensors and the K-Deltas are common to both, and so is the subscription, since both packs ship EXCELLENCE.It sits above that total. Every sensor in it can be bought on its own at RFA, and those prices added together come to less than the pack; the difference pays for the year of Kinvent Physio that ships with it.One duffle bag is itemised. Kinvent publish no capacity for it and this pack includes two plate systems and their frames, so plan the bag as transport for part of the kit unless you confirm otherwise.Departments and larger clinics running several stations, and sports medicine teams who need standing measurement and movement measurement available on the same day without choosing between them.
